Bathroom extractor fans explained – axial vs centrifugal vs inline – which do you need?
Planning a new bathroom or upgrading tired ventilation? Here's how to choose an extractor fan that can shift moisture without unnecessary noise or expense
If your bathroom mirror is still fogged up ten minutes after a shower, or you're wiping condensation off the windowsill every morning, there's a good chance your extractor fan isn't up to the job. And it isn't always because the fan is cheap or old. Often, it's simply the wrong type for the room.
There are three main types of bathroom extractor fan: axial, centrifugal and inline. They all remove moist air, but they work differently and vary in how well they cope with longer duct runs and bends.
Here's how to choose the right type for your bathroom, whether you're planning a self-build, extension or renovation.
How the different types work
Good bathroom ventilation is essential for removing moisture and preventing condensation from building up on walls, ceilings and windows. But choosing an extractor fan isn't simply about picking the model that looks best. The right type depends on the size and layout of your bathroom, and how far the extracted air needs to travel to reach the outside.
"Extractor fans are one of those things most homeowners don't think about until something goes wrong," says Julie Gokce, senior bathroom expert at More Bathrooms. "The truth is that the fan itself is only half the story, and what really matters is whether it's the right type for the space it's serving."
One important distinction is that axial and centrifugal describe how a fan moves air, while inline describes where it's installed. An inline fan can use axial, mixed-flow or centrifugal technology, so its performance depends on the model.
“The biggest difference between these three types of extractor fans is how they move air and how well they cope with resistance from ducting,” continues Ross Bliben, sales director at Bathroom Spare Parts. Resistance is how hard the fan has to work to push air through the ductwork. Every metre of ducting and every bend adds to it, which can reduce airflow.
Bring your dream home to life with expert advice, how to guides and design inspiration. Sign up for our newsletter and get two free tickets to a Homebuilding & Renovating Show near you.
Axial vs centrifugal vs inline at a glance
| Row 0 - Cell 0 | Best For |
Duct Run |
Typical Costs |
Axial |
Bathrooms on an external wall |
Short, straight runs |
£30 - £90 |
Centrifugal |
Bathrooms further from an external wall |
Medium to long runs, including bends |
£65 - £180 |
Inline |
Bathrooms in the middle of the house |
Longer runs, depending on specification |
Kits from about £35 - £65 |
*Prices are indicative, vary by model and specification, and exclude installation.
Julie Gokce has more than three decades of kitchen and interior design experience, shaping beautiful, functional spaces and offering accessible design insight for real homes.
Ross Bliben is sales director at Bathroom Spare Parts, a UK supplier of bathroom components and replacement parts for trade and retail customers.
Axial extractor fans
Axial fans are the most common type and the one most homeowners will recognise.
"An axial fan is the simplest of the three," says Julie Gokce. "The motor sits inside the room, usually mounted on an external wall or in a window, and the blades draw air straight through and out the back. It's like a small desk fan pushing air out of the room, so it moves a decent volume of air but doesn't have much force behind it."
That lack of pressure means axial fans work best with short, straight duct runs, typically around three metres or less. They're less suitable for bathrooms where air needs to travel further or negotiate several bends.
Pros: Usually the cheapest option, straightforward to install and widely available, including quiet and humidistat-controlled models.
Cons: Performance can drop significantly on longer duct runs or where there are several bends.
Noise: "Axial fans are best suited to short, low-resistance duct runs and may become noisier when operating against higher resistance," says Poppy Szkiler, founder and CEO of Quiet Mark.
Best for: Bathrooms, en-suites and cloakrooms on an external wall, where the fan can vent directly outside.
Cost: Around £30 - £90, with premium quiet and humidistat models costing more.
Poppy Szkiler is the founder and CEO of Quiet Mark, the independent certification programme recognising quieter products and technologies. She specialises in acoustic performance and the impact of noise in the home, including how to identify quieter household appliances and ventilation products.
Centrifugal extractor fans
Centrifugal fans look similar to axial fans from the outside, but work differently.
These fans “use a drum-shaped impeller, a bit like a hamster wheel,” explains Ant Langston, bathroom expert at heatandplumb.com. “As the impeller spins, the air is forced out at a right angle to the direction it has entered."
“That change in direction generates far more pressure, which means it can cope with longer duct runs, a few bends, and the resistance of a wall-mounted grille or a ducting kit,” says Julie Gokce. “It’s the better choice when the bathroom isn’t on an external wall.”
Pros: Better able to maintain airflow through longer ducts and bends than a basic axial fan. They can still be mounted in the bathroom, making them relatively straightforward to replace and maintain.
Cons: Usually more expensive than axial fans, and the motor remains in the room.
Noise: According to Poppy Szkiler, centrifugal fans are better suited to longer duct runs, although restrictions and turbulence can still increase noise.
Best for: Bathrooms further from an external wall, or where ducting needs to travel through a ceiling void or around joists.
Cost: Roughly £65 - £180, depending on specification and controls.
Ant has been involved in the bathroom industry for over 15 years, helping to accelerate growth for several online retailers through different e-commerce channels. He has authored hundreds of articles on topics such as heating and plumbing advice, bathroom design, technical blogs and "how to" guides.
Inline extractor fans
Inline fans differ because the motor is installed remotely within the ductwork, usually in a loft or ceiling void, rather than directly on the bathroom wall or ceiling. Only the extraction grille is visible in the room.
"Because it sits inside the ducting, it can be positioned wherever there's space, and it's usually the quietest option since the noise is kept away from the room," says Julie Gokce.
However, inline describes the fan's position rather than how it moves air. "Inline fans can use either axial, mixed-flow or centrifugal technology, so their performance will depend on the actual model," explains Ross Bliben. It's important to check the manufacturer's performance figures rather than assuming every inline fan is suitable for a long duct run.
Pros: The motor is positioned away from the bathroom, helping to reduce noise in the room. They offer flexibility over installation position, can be suitable for longer duct runs when correctly specified and can serve more than one extraction grille.
Cons: More involved to install than a wall-mounted fan, with maintenance potentially harder if the unit is positioned in an inaccessible loft or ceiling void.
Noise: Poppy Szkiler says these fans are often the quietest option from the bathroom user's perspective, although poor mounting and vibration through the ductwork can still cause noise.
Best for: Bathrooms in the middle of the house, rooms below a loft and situations where the fan motor needs to be positioned remotely.
Cost: Basic kits, including ducting and grilles, start at around £35 - £65. Higher-performance models cost more, and installation is generally more expensive than for a straightforward wall-mounted fan.
Shop bathroom extractor fans
A great choice for bathrooms on an external wall, this fan runs at just 26dB(A). It has an adjustable 1 to 30-minute overrun timer and a backdraft shutter to stop heat escaping.
Built for bathrooms with a longer duct run, this fan extracts up to 22 litres per second at 34.5dB(A). It can be fitted to a wall, ceiling or panel, and its low-energy motor keeps running costs down.
This mixed-flow inline kit sits out of sight in the loft and is designed for duct runs of up to 6m. It extracts up to 52 litres per second, and comes with ducting, grilles and a light.
How to choose the right extractor fan for your bathroom
The deciding factor is basically where your bathroom sits and how far the air has to travel.
"If the bathroom is on an external wall and the duct is short and straight, an axial fan is perfectly adequate and the most cost-effective choice," says Julie Gokce. "If the duct run is longer, or has a couple of bends, a centrifugal fan is the safer bet. And if the bathroom is in the middle of the house, the duct run is long, or you want the quietest possible result, an inline fan is the right answer."
However, there are a few other things to consider before buying:
1. Check the extraction rate
Don’t judge a fan by its advertised extraction rate alone. Its actual performance will depend on the ductwork it’s connected to.
“The biggest mistake I see is homeowners choosing a fan based on its extraction rate in litres per second without factoring in the duct run,” says Julie Gokce. “A powerful axial fan fitted to a long, winding duct will perform far worse than a modest centrifugal or inline fan on the same run, because the resistance in the ducting strangles the airflow.”
In England, Approved Document F of the Building Regulations specifies a minimum intermittent extraction rate of 15 litres per second for bathrooms. However, this is a minimum requirement rather than the ideal rate for every room.
2. Get the ductwork right
Getting the ductwork right is just as important as choosing the fan itself. If you're planning on fitting an extractor fan, plan the route before positioning the unit. Keep ducts as short and straight as possible, avoiding unnecessary bends, long runs of flexible ducting and crushed or sagging sections, all of which can restrict airflow and reduce performance.
Duct diameter is also important. "If the duct diameter is smaller than the fan's outlet, you lose performance and increase noise," explains Julie Gokce. Choose ducting that matches the fan's outlet size and, where it passes through a cold loft or ceiling void, consider loft insulation to reduce the risk of condensation forming inside.
3. Factor in installation costs
Fitting an extractor fan involves electrical work in a bathroom, so it should be carried out by a qualified electrician, who can also certify that the work complies with Building Regulations. Bathrooms are divided into zones depending on how close they are to water, which affects where a fan can be positioned and what IP rating it needs.
Expect to pay around £175 - £225 to replace an existing fan, including the fan itself, or £250 - £350 for a new installation, which involves cutting a new hole and running a new electrical supply. Inline fans fitted in a loft can cost more.
4. Allow replacement air to enter
No matter what type of extractor fan you choose, it needs replacement air to enter the bathroom to work effectively.
"If the bathroom door is tightly sealed and there's no suitable air path, extraction performance can suffer," says Ross Bliben. Natural ventilation such as a suitable gap beneath the door, or another designed transfer-air route, allows fresh air to replace the moist air being extracted. This is particularly important in modern, airtight homes.
5. Consider noise and controls
Noise is especially important in en-suites and bathrooms close to bedrooms. Inline fans can help by positioning the motor away from the room, but the quality of the fan and installation are equally important.
"The motor, design, operating speed, airflow requirements and quality of installation all play an important role," explains Poppy Szkiler. Don't focus solely on the decibel rating, either. Two fans with similar readings can sound quite different. Independent acoustic certification, such as Quiet Mark, can help when comparing products.
Controls are worth considering too. A humidistat automatically activates the fan when humidity rises, while an overrun timer keeps it running after the bathroom light has been switched off. Both can help remove lingering moisture after showering, although a quiet model is particularly important if it's likely to operate at night.
FAQs
Should I choose a different fan for a self-build or extension compared to a renovation?
Planning a bathroom from scratch is the best opportunity to get ventilation right. Where possible, position bathrooms and en-suites on an external wall so a short, straight duct and an economical axial fan will do the job. If this isn't possible, agree the duct route with your designer and electrician early, before joists, ceilings and first-fix electrics are installed. Allow enough space for ducting and make sure there's access for maintaining any inline fan.
In highly airtight new homes, it's also worth asking your designer whether whole-house ventilation, such as mechanical ventilation with heat recovery (MVHR), is more appropriate than relying solely on individual extractor fans.
In a bathroom renovation, you're often working with an existing bathroom position and ductwork. Before buying a replacement fan, check the length and condition of the ducting, how many bends it has and whether it terminates properly outside.
If an old axial fan has never cleared the steam, the problem may be its suitability for the duct run rather than its age. Switching to a correctly specified centrifugal or inline model could improve performance.
A renovation is also a good opportunity to replace or reroute poor ducting while the ceiling is open.
For most bathrooms, the right extractor fan comes down to one question: how far does the air have to travel? Answer that first, then choose a fan with enough power, the right controls and a noise level you can live with.
“A properly specified and installed extractor fan can make a significant difference to condensation, mould prevention and the overall condition of your bathroom,” says Ross Bliben. “Spending a little more on the right fan is often far cheaper than dealing with persistent damp, damaged paintwork or mould problems later on.”
Gabriella is an interiors journalist and has a wealth of experience creating interiors and renovation content. She was Homebuilding & Renovating's former Assistant Editor as well as the former Head of Solved at sister brand Homes & Gardens, where she wrote and edited content addressing key renovation, DIY and interior questions.
She’s spent the past decade crafting copy for interiors publications, award-winning architects, and leading UK homeware brands. She also served as the Content Manager for the ethical homeware brand Nkuku.
Gabriella is a DIY enthusiast and a lover of all things interior design. She has a particular passion for historic buildings and listed properties, and she is currently in the process of renovating a Grade II-listed Victorian coach house in the West Country.