7 quick, simple and inexpensive ways to upgrade your kitchen cabinet doors
New kitchen cabinet doors aren’t cheap, so save yourself some serious money with smart updates you can easily do yourself
Kitchen cabinet doors play a big part in the look of your kitchen, but the reality is they’re not cheap to replace if you want to renovate your kitchen.
The easy, and inexpensive option is of course to reuse your current doors, and with a few DIY tricks up your sleeve it's something most homeowners can do.
Whether you're looking for a new colour, or just want your cabinet doors to fit properly, we've put together a collection of quick and easy fixes to get your doors neatly lined up, refreshed, and even boasting a change of style – without too much cost.
1. Say goodbye to drooping doors
Kitchen cabinet doors neatly line up when new, but over time the vertical edge can start to droop meaning the top of the door edge will no longer line up with the bottom. On single doors, this is irritating, and even more obvious on double doors.
A quick fix is to check the screws attached to both the cabinet and the door. I recommend you hand-tighten them with a suitable screwdriver, rather than one of the best cordless drills, as it can easily over-tighten them and cause more problems.
If a screw keeps spinning and won't tighten it means the hole has been stripped and there are a few solutions you can use to fix this.
One is to pack the hole with wooden toothpicks or matches (cut to size) and glue. Once dry, sand flat if needed and refit the screws. Alternatively, use a suitably sized wooden dowel and wood glue such as this Gorilla Wood Glue from Amazon. Both will provide a solid base to ensure a secure fix.
Bring your dream home to life with expert advice, how to guides and design inspiration. Sign up for our newsletter and get two free tickets to a Homebuilding & Renovating Show near you.
If the hinges are too worn or faulty though, then your best option is to replace them. The simple solution is a like-for-like replacement. Just make sure the hinge cup will fit the current hole in the door. Typically, most will.
2. Adjust for the perfect fit
Kitchen cabinet doors need to line up for the perfect fit, and the simple solution is to adjust the hinges. It's not difficult, but you need to know what you’re doing to get it right, as second-guessing rarely works; I can promise you.
Concealed hinges, like these Blum Steel 110° Concealed Hinges from Screwfix, are a popular choice for kitchen cabinet doors. These consist of three adjustment screws.
The front screw (nearest the hinge) adjusts the door left and right.
The middle screw (slightly hidden) adjusts the height (up and down).
The third screw (furthest away from the hinge) adjusts the depth of the door - the gap between the closed door and the cabinet.
However, not all kitchen cabinet door hinges are the same. Some will have two adjustment screws. In this case, typically, the screw at the back adjusts the depth (forward and backwards). The front screw will move the door left and right (rotate clockwise to move right).
To adjust vertically, loosen the fixing screws on each hinge, push the door up or down, and retighten.
Shop these tools to upgrade kitchen cabinet doors
A clear varnish adds an extra layer of protection to a painted surface making it ideal for low sheen paint. Choose from gloss, matt or satin to match your desired finish.
This set includes 12 line-free mini rollers which are packaged in pairs in reusable sealable bags. A 5-litre mini scuttle ensures fewer refills.
This wood effect vinyl wrap is 67.5cm wide making it ideal for standard kitchen cabinet doors. Its 10m length will be enough to cover around 15-20 doors.
3. Tighten or replace door handles
If you're still in love with your current door handles, and they've worked loose, simply tighten them. Hold the handle and use a screwdriver to tighten the screw which will be located on the back of the cabinet door.
If you can’t tighten them enough, the holding screw may be too long, so remove and check the screw length. If it is too long, use a hacksaw to shorten the screw.
However, kitchen trends change and if you've fallen out of love with the current handles, replacing them is a quick and simple upgrade. New handles can make a big impact on the appeal of a kitchen cabinet door, both aesthetically and functionally.
Single screw handles are the easiest to replace. Just check the screw hole size. If the screw is larger than the current hole, you can drill out a new larger hole. If the screw is smaller, you’ll need to pack the gap out, and wooden cocktail sticks will usually do the job.
If swapping from a single to double screw handle, you’ll need to drill an extra hole. However, you’ll want as few extra holes as possible, so when possible, use the original hole and add another.
If this doesn't work, drill new holes and to hide the old holes on painted doors, fill, sand and paint (hopefully you'll still have the original paint).
4. Repaint and refresh
Painting kitchen cabinet doors is a popular kitchen renovation upgrade, especially as old cabinet doors can be one of the things that makes your kitchen look dated.
You'll need to do the job properly if you want the paint to last, so start with the right sandpaper grades. I recommend 120-grit sandpaper followed by 240-grit sandpaper.
If sanding gloss doors, remove the shine for a good finish, and if sanding decorative doors, use a detail sander like this Black + Decker Corded Mouse Sander from Argos and/or sanding sponges to get into difficult-to-reach areas.
Start with a primer like Dulux Trade Quick Dry Wood Primer & Undercoat from B&Q, then add a topcoat. Think about the type of paint you use though, as higher-sheen paints are typically easier to clean.
Zinsser Allcoat, available at Wickes, is a durable exterior paint that comes in a host of colours and is available in matt, satin or gloss finishes. Alternatively, use any paint you want and, if needed, add a protective clear varnish layer for easier cleaning.
Venture away from the obvious finished look by trying some smart painted kitchen cabinet ideas, such as painting the inside of the door and cabinet in a contrasting colour.
Whatever you choose, apply the paint with a short-pile or foam mini roller and a 2-inch paintbrush to get a smooth, even finish. Take a look at my recent decorating kit purchases to find out what I use and recommend.
5. Go handleless
Fancy a handleless kitchen? Going handle-free will give you clean modern lines and is another easy kitchen cabinet upgrade.
An easy upgrade is to remove handles, fill and paint and introduce a push catch to the rear of the door and cabinet edge, such as this Jiayi Push Open Door Latch from Amazon. These are adjustable and easy to install.
Julie Gokce, senior kitchen designer at More Kitchens, offers another smart suggestion: “Have circular holes routed directly into the door fronts to create a finger pull. It creates a wonderfully minimalist, seamless look (often seen in Scandinavian and Japandi design).
“If you're worried about the raw edge of the cut-out, you can either have it perfectly sanded and sealed, or line it with a slim brass or black metal grommet for a really high-end, bespoke finish,” she suggests.
Julie Gokce brings over 40 years of expertise in the kitchen design world. Though holding a diverse array of roles during that time, her passion for design has been her guiding light, always leading her back to her true love: crafting bespoke and innovative kitchen designs.
6. Vinyl wrap your cabinet doors
If you want a totally new look for your cabinet doors that paint can’t achieve, vinyl wrap is a smart alternative. “If you love the look of a totally different material, like concrete, fluted glass, marble or even a textured wood grain, but don't want the expense of replacing the doors, a high-quality architectural vinyl wrap is a brilliant alternative to painting," agrees Julie Gokce.
“It's incredibly durable, wipeable, and can completely transform the look of a kitchen in a weekend,” she adds. But, as with painting cabinet doors, you need to make sure you get your preparation right.
"The doors need to be removed, thoroughly degreased, (use sugar soap) and the wrap applied meticulously with a heat gun to get perfect edges,” advises Julie. Invest in the right kit such as these Vinyl Wrap Tools from Amazon to help ensure a professional finish.
7. Give plain doors a new style and look
Want a new style kitchen cabinet door without buying one? Slab kitchen doors are a blank canvas, ripe for an upgrade. Attach narrow strips of 6mm MDF, (like this Arranwood Standard MDF Board from B&Q), at the top, sides and bottom and you have Shaker style cabinets. Use a strong wood glue to attach before painting.
“You can also instantly change the character of a plain cabinet by adding a thin, decorative overlay," suggests Julie Gokce. "A slatted wood panel or a delicate fretwork grille fitted over the existing door (or in place of the centre panel of a Shaker door) adds texture, depth and a real bespoke feel.”
“It's a wonderful way to introduce a touch of country, coastal or Art Deco style without ripping the kitchen out,” she adds. You could also try adding cane webbing to your door fronts, as another of our DIY experts did on some wardrobe doors.
Upgrading your kitchen cabinet doors is just one route to a new-look kitchen you will love. For other cheap and easy upgrades, take a look at the kitchen decor ideas that can boost your kitchen's appearance, without breaking the bank, or find out why I recommend peel-and-stick tiles for your kitchen floor or splashback.
Steve Jenkins is a freelance content creator with over two decades of experience working in digital and print and was previously the DIY content editor for Homebuilding & Renovating.
He is a keen DIYer with over 20 years of experience in transforming and renovating the many homes he has lived in. He specialises in painting and decorating, but has a wide range of skills gleaned from working in the building trade for around 10 years and spending time at night school learning how to plaster and plumb.
He has fitted kitchens, tiled bathrooms and kitchens, laid many floors, built partition walls, plastered walls, plumbed in bathrooms, worked on loft conversions and much more. And when he's not sure how to tackle a DIY project he has a wide network of friends – including plumbers, gas engineers, tilers, carpenters, painters and decorators, electricians and builders – in the trade to call upon.