Homebuilding Verdict
If you need more power for drilling into masonry, removing tiles and a power tool to tackle lightweight demolition jobs, the Black + Decker BEHS01-GB SDS drill could just be what you are looking for. It's affordable and corded, so there’s no need to pay for extras, and it delivers consistent power. No need to worry about a battery running out of juice. There’s no carry case or SDS chisel bits included, but you do get a keyed chuck so it can double up as a standard drill. Something that DIYers might like.
Pros
- +
Includes two SDS+ drill bits
- +
Handy depth stop
- +
Lock on button
- +
Easy-to-use keyless chuck
- +
Ideal for DIY projects
Cons
- -
Lacks power for heavy-duty tasks
- -
No carry bag or case
- -
No chisel bits
You can trust Homebuilding & Renovating. Our expert reviewers spend hours testing and comparing products and materials in order to help you choose the best for your home and garden. Find out more about how we test.
A cordless drill and DIY go hand in hand, but there will be a time when even the best cordless drill simply doesn’t have the power to cope with a project. That’s when it's time to call in an SDS drill. This boasts what is known as a Slotted Drive System (hence the SDS moniker), which works differently from a standard cordless/corded drill with a grip chuck.
To keep it simple, it uses a different type of drill bit that gives the drill more hammer action. Making it ideal for heavy-duty tasks that a standard drill can’t handle.
Like most Black + Decker tools, this SDS hammer drill is aimed at DIYers and not professionals. So how would it tackle the DIY jobs I had lined up? Read on to find out.
Specification
- Motor: 650W
- Impact energy: 1.4J
- Cord length: 2 metres
- Weight: 2.3kg
- Chuck capacity: 2mm-13mm
- Chuck type: SDS+
- Guarantee: 2 years
- Features: 1 x keyed chuck, 8mm SDS-PLUS bit, 1 x 6mm SDS-PLUS bit, 1 x adjustable and removable side handle, Depth stop, 3 x drilling and hammer modes.
First impressions
The unboxing of a power tool is always a highlight for me, but it didn’t take long with this Black & Decker BEHS01 hammer drill. The drill itself sits in the box, no plastic wrap, along with a handle, gauge stop and a small cardboard box containing a drill chuck and SDS+ drill bits. From an environmental perspective (which, in my opinion, matters), there is little packaging to get rid of, and what little there is is 100% recyclable and chlorine-free.
The lack of a hard case or carry case is a minus point. All my other Black & Decker tools have always come with at least a carry bag. I’ve noted that some sellers show the drill with a carry case, but I’ve not seen one that actually comes with one. A shame as I would have liked a hard carry case.
The Black & Decker BEHS01 is weighty, but in SDS drill terms, it is relatively lightweight. It is well-balanced and has a soft-grip handle that holds the drill firmly in the hand. Other notable features are the thick 2m cord (generally means more power), the mode selector that locks into place (I liked that), a reverse switch, and a small mystery button, which I suspected would be a power lock button, but we will find out later. Overall, I liked what I saw.
Set up
A corded drill like the Black & Decker BEHS01, means you don’t have to worry about charging up a battery before you can get started. One less step in the setup process. And, as it comes with a UK plug you can plug it in straight away, hit the trigger, feel the power, and appreciate the noise.
Like most drills, there are three modes on the Black & Decker BEHS01. You’ve got drill, drill and hammer and hammer. You simply need to choose the one most appropriate for the job. The selector is a decent size, and operation is easy. A push button releases the selector and locks it in place when you reach your chosen mode. For me, I liked the added extra peace of mind.
Elsewhere, the keyless chuck is a breeze to use. Pull back the sleeve, insert your bit, and you are ready to go. It's the same process to release it. And let's not forget the side handle included to help steady the drill. This fits behind the chuck and can be placed in your favoured position thanks to the inbuilt notches. A small plastic nut tightens the handle in position, ready for action.
Finally, an interesting addition was the chuck adaptor for use with standard drill bits. I can see that Black + Decker are trying to add value and purpose, but I’ve already got my newly acquired Einhell cordless drill that does what I want so wasn't sure if this was necessary.
It does mean you can get extra power without having to splash out on SDS-friendly drill bits, but it looked awkward, and I just wasn’t sure about it.
Performance
The Black + Decker BEHS01 came with a couple of 6mm and 8mm SDS drill bits, which immediately limited how I could use it. So I invested in this 3-piece Erbauer SDS Plus Shank Chisel Set from Screwfix to test the Black + Decker BEHS01 more thoroughly. This included a 250 mm point chisel and 2 x flat chisels (20 x 250 mm and 40 x 250 mm).
To kick off testing, I decided to use my new chisel bits to break up some large blocks of concrete that I had dug out of the ground a while ago. I originally tried smashing them up with a lump hammer and a cold chisel, but without much success.
The mystery button turned out to be a lock button, which I decided to call into action straightaway. The hammer mode and the smaller chisel did a good job of breaking off chunks. It still took me a good 15 minutes to break up one large piece of concrete, but with no need to worry about swapping batteries, the drill didn’t miss a beat. A return visit a couple of days later got the same results on the remaining blocks.
Next, it was time to try the supplied drill bits. First up was drilling into concrete, which it handled with ease. Next, it was drilling into exterior brickwork for hooks, an absolute breeze. Then it was indoors to drill into walls in order to put up some shelf brackets; it couldn’t have been easier. All the masonry I tried, the drill powered through.
Next, it was back to the chisels and tile removal. I had two layers of tile on tile to tackle and the first layer came off pretty easily, but the original layer (stuck to the wall) was more challenging. But again, the Black + Decker BEHS01 was up to the task.
The final test was using the keyed chuck with standard drill bits. While it looked and felt awkward, (and I’m not a fan of keyed chucks, especially when I’ve lost the key), it worked fine and gave extra power where needed. In some cases, too much power compared to my trusty cordless drill.
The one issue I had with the Black + Decker BEHS01 was the attachable side handle. It was easy to fit, but no matter how much I tightened it, it still slipped off when tackling tougher tasks. For lighter tasks, I did however get to use the handy depth gauge that slips into the handle.
Who shoud buy it?
The Black + Decker BEHS01 is a great choice for DIYers who need extra power for projects that their cordless drill simply can’t handle. It's easy to struggle through using a cordless drill when it doesn’t quite have the power you need, but this isn’t good for your cordless drill and will shorten its working life.
An SDS type of drill is a smart addition for DIYers, and the Black + Decker BEHS01 is an affordable, easy-to-use tool that provides enough power to tackle most home DIY and home renovation projects. All you need to do is fit your chosen SDS bit, choose your mode and hit the power trigger.
Final verdict
I’d definitely recommend the Black & Decker BEHS01 to any DIYer who likes tackling lightweight demolition and drilling masonry jobs, and needs a bit more power than their favourite cordless drill offers. This is a great starting point for anyone who doesn’t own an SDS drill, or an occasional DIYer who wants to replace an old, worn-out drill.
The addition of the keyed chuck seems like an odd choice, but it works and lets your SDS drill double as an everyday drill that uses standard drill bits. Personally, I prefer to use my Einhell cordless drill for standard drilling and an SDS drill when a project calls for the extra power.
I would have liked to see at least a couple of chisel bits and a carry bag or hard case included, especially as it is aimed at DIYers. I think this would have made it the complete package. However, these are small points as you are getting an affordable SDS drill that will get stuff done, in fact, almost anything a DIYer will tackle.
